Start | Browse by Day | Author Index

GHT35a PEMFC/DMFC Posters

Wednesday, October 29, 2008: 3:30 PM
Exhibit Hall
Session Chairs:
Maria G. Medeiros and Nancy Garland
GHT35a-1
Parametric Study of a Single Cell PEM Fuel Cell
Juan M. Sierra, CIE-UNAM; P.J. Sebastian, CIE-UNAM; S.A. Gamboa, CIE-UNAM
GHT35a-2
Preparation of Membrane Electrode Assemblies for Examination by SEM, TEM, XPS, and FTIR
Jerzy Gazda, Cerium Laboratories, LLC; Amiya Ghatak-Roy, Cerium Laboratories, LLC; Tim Hossain, Cerium Laboratories, LLC; Dan Posey, Cerium Laboratories, LLC; Susanne Dorn, University of Hawaii; Guido Bender, University of Hawaii
Extended Abstract
GHT35a-3
Development of Carbon Nanotubes Based Nano-Porous Gas Diffusion Layers by In-Situ CVD Process for Proton Exchange Membrane Fuel Cells
Arunachala Nadar Kannan, Arizona State University; Poornima Kanagala, Arizona State University; Vinod Veedu, Oceanit, Inc.
Extended Abstract
GHT35a-4
Carbon Nanotubes for Improved Compound-Based Injection Molded Bipolar Plates
Thorsten Derieth, Centre for Fuel Cell Technology (ZBT) gGbmH; Peter Beckhaus, Centre for Fuel Cell Technology (ZBT) gGbmH; Angelika Heinzel, Centre for Fuel Cell Technology (ZBT) gGbmH; Can Kreuz, Centre for Fuel Cell Technology (ZBT) gGbmH; Falko Mahlendorf, University Duisburg-Essen
Extended Abstract
GHT35a-6
The Design of Macrocyclic-Catalysts for Alkaline Anion Exchange Membrane Fuel Cells: Coupling Computational Simulation with Electrochemical Measurements
Rongrong Chen, Lugar Center for Renewable Energy, Indiana University Purdue University Indianapolis; Guofeng Wang, Lugar Center for Renewable Energy, Indiana University Purdue University Indianapolis; Michael Reed, Lugar Center for Renewable Energy, Indiana University Purdue University Indianapolis; Dyren Chu, Army Research Laboratory; Andrew Hsu, Lugar Center for Renewable Energy, Indiana University Purdue University Indianapolis
Extended Abstract
GHT35a-7
Microwave-Assisted Synthesis of Carbon Supported PtAuSn Nanoparticle Catalyst for Fuel Cell Applications
Hong Zhu, Beijing Jiaotong University; Yingli Liu, Henan Normal University; Haijiang Wang, Institute for Fuel Cell Innovation, National Research Council Canada; Zhijun Guo, School of Science, Beijing Jiaotong University; Yuguo Yang, Beijing Jiaotong University; Hong Jiang, Beijing Jiaotong University
Extended Abstract
GHT35a-8
Ballard's Approach To Fuel Cell Technology Demonstration: Meeting The Demands Of Real-World Applications
Paul D. Beattie, Ballard Power Systems; Kevin Colbow, Ballard Power Systems; Bien Chiem, Ballard Power Systems
Extended Abstract
GHT35a-9
Electrochemical Behavior of Supported Pd Electrocatalysts with High Activity and Selectivity towards the ORR in Ethanol-Containing Acid Solution
F.J. Rodríguez-Varela, Cinvestav Unidad Saltillo; S. Fraire-Luna, Cinvestav Unidad Saltillo; K.P. Padmasree, Cinvestav Unidad Saltillo
GHT35a-10
Degradation Study of PFSA Polymer Electrolytes: Approach from Decomposition Product Analysis
Yoshitsugu Nakagawa, Toray Research Center, Inc.; Mari Takasaki, Toray Research Center, Inc.; Yoko Sakiyama, Toray Research Center, Inc.; Kenji Tanabe, Toray Research Center, Inc.; Kenji Ookubo, Toray Research Center, Inc.; Nobuyuki Sato, Toray Research Center, Inc.; Tomohiro Minamide, Daido Institute of Technology; Hiroshi Nakayama, Daido Institute of Technology; Michio Hori, Daido Institute of Technology
Extended Abstract
GHT35a-11
Effect of Gas Impurities on PEFC Performance Determined by Electrochemical Impedance Spectroscopy
Seok-Hee Park, Korea Institute of Energy Research; Young-Gi Yoon, Korea Institute of Energy Research; Won-Yong Lee, Korea Institute of Energy Research; Jung-Hun Lee, Korea Institute of Energy Research
GHT35a-12
Compact Direct Hydrogen Fuel Cell System Using the AB5 Metal Hydride Storage Tank for the Mobile Phone
Sung Han Kim, Samsung Electro-Mechanics; Jae Hyuk Jang, Samsung Electro-Mechanics; Jae Hyoung Gil, Samsung Electro-Mechanics; Hye yeon Cha, Samsung Electro-Mechanics; Craig M. Miesse, Samsung Electro-Mechanics; Bo Sung Ku, Samsung Electro-Mechanics; Kyoung Soo Chae, Samsung Electro-Mechanics; Hong Ryul Lee, Samsung Electro-Mechanics; Kyong Bok Min, Samsung Electro-Mechanics; Jong ho Chung, Samsung Electro-Mechanics; Chang Ryul Jung, Samsung Electro-Mechanics; Eon Soo Lee, Samsung Electro-Mechanics; Yong Soo Oh, Samsung Electro-Mechanics; Suk Won Cha, Seoul National University
Extended Abstract
GHT35a-13
Current Status in Fundamental Research for the Development of Standards for Advanced Application of Fuel Cells
Yasuo Nishimura, National Institute of Advanced Industrial Science and Technology (AIST); Isao Nagai, National Institute of Advanced Industrial Science and Technology (AIST); Megumi Matsuyama, National Institute of Advanced Industrial Science and Technology (AIST); Masataka Yamane, National Institute of Advanced Industrial Science and Technology (AIST); Masahiro Yanagida, National Institute of Advanced Industrial Science and Technology (AIST); Yoshinori Miyazaki, National Institute of Advanced Industrial Science and Technology (AIST)
Extended Abstract
GHT35a-14
Preparation and Characterization of Nafion/SPPESK-PES/Nafion Multilayer Composite Membrane
Hong Zhu, Beijing Jiaotong University; Ming Wang, Beijing Jiaotong University; Yong-Sheng Wei, Beijing Jiaotong University
GHT35a-15
Investigation of the Electro-Oxidation of Ethanol at Platinum and Platinum Alloys by the Combined Use of Electrochemical and Surface Analytical Techniques
Carsten Cremers, Fraunhofer Institute for Chemical Technology ICT; Birgit Kintzel, Fraunhofer Institute for Chemical Technology ICT; Martin Joos, Fraunhofer Institute for Chemical Technology ICT; Michael Krausa, Fraunhofer Institute for Chemical Technology ICT; Julia Melke, Fraunhofer Institute for Solar Energy Systems ISE; Christina Roth, Technical University Darmstadt; David E. Ramaker, George Washington University
Extended Abstract
GHT35a-16
Development of Analytical Techniques to Study H2S Poisoning of PEMFCs and Components
Eric L. Brosha, Los Alamos National Laboratory; Tommy Rockward, Los Alamos National Laboratory; Francisco A. Uribe, Los Alamos National Laboratory; Fernando H. Garzon, Los Alamos National Laboratory
Extended Abstract
GHT35a-17
Formation of Pt Clusters Covered with Carbon Layer and Origin of the Generation of the Electricity
Akihito Kumamoto, Ritsumeikan University; Hiroshi Shingu, Ritsumeikan University; Chihiro Kaito, Ritsumeikan University; Hitoshi Suzuki, Tohoku Gakuin University
Extended Abstract
GHT35a-18
Numerical Analysis of Heat and Mass Transfer in Gas Diffusion Layer with Heterogeneous Structure
Gen Inoue, Kyushu University; Yosuke Matsukuma, Kyushu University; Masaki Minemoto, Kyushu University
Extended Abstract
GHT35a-19
Effects of the PTFE Content in Micro Porous Layer and the Thickness of Gas Diffusion Medium on Cathode Performance in a PEMFC
Jeong Hwan Chun, Korea University; Sung Hyun Kim, Korea University; Ki Tae Park, Korea University; Sun Hee Park, Korea University; Hyun Wook Jung, Korea University
Extended Abstract
GHT35a-20
The Effect of Air Impurities on the PEMFC Performances
Jong Hyun Jang, Korea Institute of Science and Technology; Yi-Young Kim, Korea Institute of Science and Technology; Ji-Hwan Son, Korea Institute of Science and Technology; EunAe Cho, Korea Institute of Science and Technology; Sang-Yeop Lee, Korea Institute of Science and Technology; Hyung-Juhn Kim, Korea Institute of Science and Technology; Tae-Hoon Lim, Korea Institute of Science and Technology; Jonghee Han, Korea Institute of Science and Technology
Extended Abstract
GHT35a-21
Customized Design and Performance Analysis of the Plug-In Fuel Cell Vehicle
Minjin Kim, Korea Institute of Energy Research; Young-Jun Sohn, Korea Institute of Energy Research; Kyoungyoun Kim, Korea Institute of Energy Research; Won-Yong Lee, Korea Institute of Energy Research; Chang-Soo Kim, Korea Institute of Energy Research
Extended Abstract
GHT35a-22
Investigation of Cation-Induced Performance Losses in PEM Fuel Cells
Andrew J. Steinbach, 3M Company; Kolapo Alade-Lambo, 3M Company; Hien Le, 3M Company; Mark K. Debe, 3M Company
Extended Abstract
GHT35a-23
PEM Fuel Cell Durability Studies
Rod L. Borup, Los Alamos National Lab; John R. Davey, Los Alamos National Lab; Axel B. Ofstad, Norwegian University of Science and Technology; Hui Xu, Fuel Cell Energy; Rangachary Mukundan, Los Alamos National Lab; Fernando H. Garzon, Los Alamos National Lab; Bryan S. Pivovar, Los Alamos National Lab
Extended Abstract
GHT35a-24
Startup Procedures for a HT-PEMFC Stack
Joachim Scholta, Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW); Stefan Wazlawik, MS 2 Engeneering und Anlagenbau GmbH; Robert Kuhn, Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW); Ludwig Jörissen, Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW)
Extended Abstract
GHT35a-25
Verification of Measuring Method with Magnetic Sensor of Current Distribution in Polymer Electrolyte Fuel Cell
Masaaki Izumi, The University of Kitakyushu; Yuji Gotoh, Oita University; Takayuki Yamanaka, The University of Kitakyushu
Extended Abstract
GHT35a-26
Gas Diffusion Medium Based on Nanocomposite Materials
Paolo Grassini, Seal S.p.a.; Paolo Fracas, Saati S.p.a.; Davide Brivio, Seal S.p.a.; Giovanni Dotelli, Politecnico di Milano; Paola Gallo Stampino, Politecnico di Milano; Luca Omati, Politecnico di Milano
GHT35a-27
Oxygen Reduction Activities of Nanostructured Thin Film Alloy Electro Catalysts
George D. Vernstrom, 3M Company; Allison K. Schmoeckel, 3M Company; Radoslav T. Atanasoski, 3M Company; Susan M. Hendricks, 3M Company; Andrew J. Steinbach, 3M Company; Mark K. Debe, 3M Company
Extended Abstract
GHT35a-29
Optimization of the Conductivity and Passivity Properties of Passive Films on Stainless Steels Used as Bipolar Plates in PEFC
Laurent Antoni Sr., CEA; Johan Andre, CEA; Jean-Pierre Petit Sr., INPG
Extended Abstract
GHT35a-30
Characterization Studies on PEM Metallic Bipolar Plates and Membrane Electrode Assembly After One Thousand Hours of Operation
Yue Hung, Farmingdale State College; Hazem Tawfik, Farmingdale State College; Devinder Mahajan, Stony Brook University
Extended Abstract
GHT35a-31
Analysis Technology of an Integrated Thermal Management System in a Hybrid Fuel Cell Vehicle
Sung Chul Kim, Korea Automotive Technology Institute; Son Ah Cho, Korea Automotive Technology Institute; Ho Seong Lee, Korea Automotive Technology Institute; Dong Hyuk Lee, Korea Automotive Technology Institute; Jong Phil Won, Korea Automotive Technology Institute; Yong Sun Park, Hyundai Motor, Co.; Tae Won Lim, Hyundai-Kia Motors; Dae Woong Lee, Halla Climate Control, Co.
Extended Abstract
GHT35a-32
Oxide(SnO2,CeO2,Co3O4 and NiO)-Promoted Pt/C Electrocatalysts for PEMFCs
Hong Jiang, Beijing Jiaotong University; Zhao Feng Huang, Beijing Jiaotong University; Chi Yu, Beijing Institute of Technology; Hong Zhu, Beijing Jiaotong University
Extended Abstract
GHT35a-33
An Experimental Study of High Temperature PEM Fuel Cells
Andrew Higier, University of Miami; Saif Matar, University of Miami; Hongtan Liu, University of Miami
Extended Abstract
GHT35a-34
3D Multiphase CFD Simulation of PEM Fuel Cells and Experimental Validation
Clemens Fink, The Virtual Vehicle - Competence Center; Peter Parz, Graz University of Technology; Viktor Hacker, Graz University of Technology; Günter Brenn, Graz University of Technology; Peter Prenninger, AVL List GmbH
Extended Abstract
GHT35a-35
PEM Fuel Cell Stack Dynamics, Constraining Supervisory Control for Propulsion Systems in Fuel Cell Busses
Edwin Tazelaar, HAN University; Erik Middelman, NedStack Fuel Cell Technology; Bram Veenhuizen, HAN University; Paul Van den Bosch, Eindhoven University of Technology
Extended Abstract
GHT35a-36
Advantages of Carbon Nano Fiber Supported Fuel Cell Electrodes
Viktor Hacker, Institute for Chemistry and Technology of Inorganic Materials, Graz University of Technology; Markus Perchthaler, Institute for Chemistry and Technology of Inorganic Materials, Graz University of Technology; Eva Wallnöfer, Institute for Chemistry and Technology of Inorganic Materials, Graz University of Technology; Klaus Mauthner, Electrovac AG
Extended Abstract
GHT35a-37
Pt-Based Catalysts for MT-WGS reaction for PEM-FC Applications
Vito Specchia, Politecnico di Torino; Camilla Galletti, Politecnico di Torino; Stefania Specchia, Politecnico di Torino; Guido Saracco, Politecnico di Torino
Extended Abstract
GHT35a-38
Effect of Freezing on PEM-FC Components
Gianluigi Gavello, Politecnico di Torino; Elisa P. Ambrosio, Politecnico di Torino; Ugo A. Icardi, Politecnico di Torino; Stefania Specchia, Politecnico di Torino; Nerino Penazzi, Politecnico di Torino; Vito Specchia, Politecnico di Torino; Guido Saracco, Politecnico di Torino
Extended Abstract
GHT35a-39
Design, Testing and Diagnosis of a Modeling PEM Fuel Cell
Xiao Zi Yuan, Institute for Fuel Cell Innovation; Mauricio Blanco, Institute for Fuel Cell Innovation; Saul Pazos-Knoop, Institute for Fuel Cell Innovation; Elton Gu, Institute for Fuel Cell Innovation; Colin Sun, Institute for Fuel Cell Innovation; Jinfeng Wu, Institute for Fuel Cell Innovation; Jonathan J. Martin, Institute for Fuel Cell Innovation; Haijiang Wang, Institute for Fuel Cell Innovation
GHT35a-40
Nanostructured Bimetallic Alloys Prepared Via Mechanic-Chemical Synthesis as PEMFC Electrocatalysts for Transport Applications
Gabriele Mulas, Università di Sassari; Nerino Penazzi, Politecnico di Torino; Marialaura Lucariello, Environmental Park; Mihaela-Aneta Dumitrescu, Politecnico di Torino; Stefania Specchia, Politecnico di Torino
Extended Abstract
GHT35a-41
Synthesis of carbon supports for catalytic applications in PEMFC
Elisa P. Ambrosio, Politecnico di Torino; Carlotta Francia, Politecnico di Torino; Stefania Specchia, Politecnico di Torino; Paolo Spinelli, Politecnico di Torino; Maela Manzoli, Università di Torino
Extended Abstract
GHT35a-42
Development of Unitized Regenerative Fuel Cell Electrodes
K. Andreas Friedrich, Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Stuttgart, Germany; Sebastian Altmann, University of Stuttgart; Till Kaz, Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Stuttgart, Germany
Extended Abstract
GHT35a-43
Improved, Low-Cost, Durable Fuel Cell Membranes
James T. Goldbach, Arkema, Inc.; David Mountz, Arkema, Inc.; Jung Yi, Arkema, Inc.; Tao Zhang, Arkema, Inc.; Wensheng He, Arkema, Inc.; Scott Gaboury, Arkema, Inc.; Michel Foure, Arkema, Inc.
GHT35a-44
Optimization of Catalyst Deposited Diffusion Layer for a DNBFC
George H. Miley, University of Illinois; Rob Bernas, University of Illinois; Kyu-Jung Kim, University of Illinois; Nie Luo, University of Illinois
Extended Abstract
GHT35a-45
Implementing a Standardized Fuel Cell Testing Procedure
Ross Bailey, Greenlight Innovation
Extended Abstract
See more of: Poster
<< Previous Session | Next Session >>