Start | Browse by Day | Author Index

RDP25a Solid Oxide Fuel Cell Posters

Tuesday, October 28, 2008: 3:45 PM
Exhibit Hall
Session Chairs:
Maria G. Medeiros and Nancy Garland
RDP25a-1
Fuel Flexible Solid Oxide Fuel Cells
Nguyen Minh, Consultant
RDP25a-2
Low Temperature SOFC with Bi-Layered Electrolyte Structure
Xinge Zhang, Institute for Fuel Cell Innovation; Mark Robertson, Institute for Fuel Cell Innovation; Cyrille Deces-Petit, Institute for Fuel Cell Innovation; Yongsong Xie, Institute for Fuel Cell Innovation
Extended Abstract
RDP25a-3
Low Temperature SOFC Cathode Layers Deposited by Reactive Spray Deposition Technology without the Need for Additional Sintering
Radenka Maric, National Research Council of Canada, Institute For Fuel Cell Innovation; Roberto Neagu, National Research Council of Canada, Institute For Fuel Cell Innovation; Xinghe Zhang, National Research Council of Canada, Institute For Fuel Cell Innovation; Justin Roller, National Research Council of Canada, Institute For Fuel Cell Innovation
Extended Abstract
RDP25a-4
Advanced Sealing Technology for High-Temperature Solid Oxide Fuel Cells (SOFCs)
Bob Liu, Aegis Technology, Inc.; Tim Lin, Aegis Technology, Inc.; Quan Yang, Aegis Technology, Inc.; Chuck Tan, Aegis Technology, Inc.
Extended Abstract
RDP25a-5
Electrode Development for High Performance SOFCs
Matthew M. Seabaugh, NexTech Materials, Ltd.; Michael Day, NexTech Materials, Ltd.; Paul Matter, NexTech Materials, Ltd.; Lora Thrun, NexTech Materials, Ltd.; Buddy McCormick, NexTech Materials, Ltd.; Sergio Ibanez, NexTech Materials, Ltd.; Kellie Chenault, NexTech Materials, Ltd.; Amanda Miller, NexTech Materials, Ltd.
Extended Abstract
RDP25a-6
The Impact and Mitigation of Carbon Formation on Ni-YSZ Anodes from Biomass Gasification Tars
Joshua Mermelstein, Imperial College of London; Marcos Millan, Imperial College of London; Nigel P. Brandon, Imperial College of London
Extended Abstract
RDP25a-7
Development of Nano-Composite Cu-based SOFC Anodes for Direct Utilization of Hydrocarbon Fuels
Jong-Jin Lee, Yonsei University; Eon-Woo Park, Yonsei University; Sung-Chul Park, Yonsei University; Hae-Gu Park, Yonsei University; Sang-Hoon Hyun, Yonsei University
RDP25a-8
Development of Solid Oxide Fuel Cells at  NGK Spark Plug Co., Ltd
Yusuke Todo, NGK Spark Plug Co., Ltd.; Hiroya Ishikawa, NGK Spark Plug Co., Ltd.; Masahiro Shibata, NGK Spark Plug Co., Ltd.; Hideki Uematsu, NGK Spark Plug Co., Ltd.; Ichiro Gonda, NGK Spark Plug Co., Ltd.; Hiroshi Sumi, NGK Spark Plug Co., Ltd.; Yasuo Okuyama, NGK Spark Plug Co., Ltd.; Yoshitaka Usui, NGK Spark Plug Co., Ltd.; Daisuke Komatsu, NGK Spark Plug Co., Ltd.; Keizo Furusaki, NGK Spark Plug Co., Ltd.
Extended Abstract
RDP25a-9
Application of Co-Ni Coated Stainless Steels for SOFC Cathode Current Collectors
Jae-Myung Lee, RIST; Jae-Ho Jun, RIST; Do-Hyeong Kim, RIST; Joong-Hwan Jun, RIST
RDP25a-10
Ni/Cu-YSZ SOFC Anode Processing by Mechanical Alloying and Sintering by Activated Surface
Thomaz A. Guisard Restivo, IPEN; Sonia R. H. Mello-Castanho, IPEN
Extended Abstract
RDP25a-11
Advanced Anode-Supported Micro-Tubular SOFC Development
Chendong Zuo, NanoDynamics Energy, Inc.; Yanhai Du, NanoDynamics Energy, Inc.; Praveen Cheekatamarla, NanoDynamics Energy, Inc.; Caine Finnerty, NanoDynamics Energy, Inc.
Extended Abstract
RDP25a-12
Status of Refractory Sealing Glass Development at PNNL: Effect of Aluminization on the Mechanical Strength and Electrical Stability
Yeong-Shyung Chou, Pacific Northwest National Laboratory; Jeffry W. Stevenson, Pacific Northwest National Laboratory; Jung Pyung Choi, Pacific Northwest National Laboratory; Prabhakar Singh, Pacific Northwest National Laboratory; K. Scott Weil, Pacific Northwest National Laboratory
RDP25a-13
Performance Improvement of Anode-Supported Solid Oxide Fuel Cell with LSGM Electrolyte by the Use of Lanthanum Doped Ceria as a Buffer Layer
Ju-hyeong Han, Korea University; Eun-Gu Kim, Korea University; Dokyol Lee, Korea University
Extended Abstract
RDP25a-14
Chemical Compatibility and Electrical Conductivity Studies in the Gd2-yLayZr2O7/ La0.7Sr0.3MnO3 System
K.P Padmasree, CINVESTAV Unidad Saltillo; Antonio Fernandez Fuentes, CINVESTAV Unidad Saltillo; Jose Alonso Díaz Guillen, CINVESTAV Unidad Saltillo; Mario Roman Díaz Guillen, CINVESTAV Unidad Saltillo
Extended Abstract
RDP25a-15
Oxidation Performance of Alloys for Heat Exchangers in Solid Oxide Fuel Cells
Vinay P. Deodeshmukh, Haynes International, Inc.; Nacera Sabrina Meck, Haynes International, Inc.
Extended Abstract
RDP25a-16
Next Generation of Coatings for Minimizing Chromium Evaporation from an Interconnector of 22% Cr Ferritic Steel
Jan-Erik Svensson, Chalmers University of Technology; Hannes Falk Windisch, Chalmers University of Technology; R. Hackl, Chalmers University of Technology; J. Froitzheim, Chalmers University of Technology; Ulf Bexell, AB Sandvik Materials Technology; Mikael Schuisky, AB Sandvik Materials Technology
Extended Abstract
RDP25a-17
Development of Cu-Ni-YSZ SOFC Anodes by Direct and Pulse Electroplating for Internal Reforming of Methane
Eon-Woo Park, Yonsei University; Hwan Moon, Yonsei University; Sang-Hoon Hyun, Yonsei University
RDP25a-18
LSC-Based Composites with Optimal Composition and Microstructure as Current Collecting Materials for Microtubular SOFCs
Teruhiko Misono, Hosokawa Powder Technology Research Institute; Kenji Murata, Hosokawa Powder Technology Research Institute; Masahiro Kusumoto, Hosokawa Powder Technology Research Institute; Jingtian Yin, Hosokawa Powder Technology Research Institute; Takehisa Fukui, National Institute of Advanced Industrial Science and Technology (AIST)
Extended Abstract
RDP25a-19
Spatially Resolved Electrochemical Performance in a Segmented Planar SOFC
Guenter Schiller, Deutsches Zentrum für Luft- und Raumfahrt (DLR); Nicolas Bayer Botero, University of Heidelberg; Wolfgang G. Bessler, Deutsches Zentrum für Luft- und Raumfahrt (DLR); Andreas K. Friedrich, Deutsches Zentrum für Luft- und Raumfahrt (DLR); Stefan Gewies, Heidelberg University; Caroline Willich, Deutsches Zentrum für Luft- und Raumfahrt (DLR)
Extended Abstract
RDP25a-20
Improvement of Micro Tubular SOFC Bundles
Yoshihiro Funahashi, Fine Ceramics Research Association; Toshio Suzuki, National Institute of Advanced Industrial Science and Technology (AIST); Yoshinobu Fujishiro, National Institute of Advanced Industrial Science and Technology (AIST); Toru Shimamori, NGK Spark Plug Co., Ltd.; Masanobu Awano, National Institute of Advanced Industrial Science and Technology (AIST)
Extended Abstract
RDP25a-21
Combustion in Porous Media for Fuel Cell Applications
Jörg Adler, Fraunhofer Insitut fuer Keramische Technologien und Systeme; Matthias Jahn, Fraunhofer Insitut fuer Keramische Technologien und Systeme; Michael Stelter, Fraunhofer Insitut fuer Keramische Technologien und Systeme; Felix Marschallek, Fraunhofer Insitut fuer Keramische Technologien und Systeme
Extended Abstract
RDP25a-22
Characterization of SOFC Interconnect Materials Sandvik Sanergy HT and Crofer 22 APU
Olli Himanen, VTT; Jari Kiviaho, VTT; Jari Ihonen, VTT; Markus Rautanen, VTT; Ulf Bexell, Ab Sandvik Materials Technology; Jan-Erik Svensson, Chalmers University of Technolgy; Hannes Falk Windisch, Chalmers University of Technolgy; Stefan Holmström, VTT
Extended Abstract
RDP25a-25
Development of Catalyst- Assisted Direct Internal Reforming SOFCs
Ilwon Kim, Functional Coating Technology; Manoj Pillai, Functional Coating Technology; Nikkia McDonald, Functional Coating Technology; Scott Barnett, Functional Coating Technology; Piotr Blaszczak, Functional Coating Technology
RDP25a-26
Solid Oxide Fuel Cells: Development Activities, Trends and Technological Challenges
Nguyen Minh, Consultant; Subhash Singhal, Fuel Cells Pacific Northwest National Laboratory; Mark Williams, University of Utah
Extended Abstract
See more of: Poster
<< Previous Session | Next Session >>