2008 Fuel Cell Seminar & Exhibition: Fuel Cell Testing & Modeling Posters

GHT25b-1

Analysis and Optimization of the Cell Design of a PEMFC-Stack
Juergen Pawlik, Viessmann Werke; Nils Chmielewski, Viessmann Werke; Joachim Scholta, ZSW Zentrum für Sonnenenergie und Wasserstoff-Forschung; Werner Lehnert, Forschungszentrum Juelich GmbH

Extended Abstract

GHT25b-2

Cathode Catalyst Degradation in PEM Fuel Cells: A Differential Electrochemical Mass Spectrometry Study
Wei Li, The University of Alabama; Alan Lane, The University of Alabama

Extended Abstract

GHT25b-4

Cell Voltage Monitoring: An Automated Interpretation of Long-Term Stack Behaviour for Fuel Cells
Gilbert Van Bogaert, VITO; Grietus Mulder, VITO; Peter Coenen, VITO; Fjo De Ridder, VITO; Adwin Martens, VITO; Ivan Verhaert, Katholieke Hogeschool Kempen

Extended Abstract

GHT25b-5

Hydrogen/Oxygen PEM Fuel Cell Stack Durability Testing for Aerospace Applications
Ying Song, Teledyne Energy Systems, Inc.; Bob Wynne, Teledyne Energy Systems, Inc.; Mark Hoberecht, NASA Glenn Research Center

Extended Abstract

GHT25b-6

Mechanical Durability and Characterization of Polymer Electrolyte Membranes
Alan Jones, Richard G. Lugar Center for Renewable Energy, Indiana University - Purdue University at Indianapolis; Jason Cummings, Indiana University - Purdue University at Indianapolis

Extended Abstract

GHT25b-7

An instrument-based integrated architecture for developing a direct liquid-feed fuel cell system
Ya-Chien Chung, Technology and Science Institute of Northern Taiwan; Yu-Jen Chiu, Technology and Science Institute of Northern Taiwan; Sheng-Hwa Chen, Technology and Science Institute of Northern Taiwan

GHT25b-8

Numerical Analysis on Effects of Humidification and Stoichiometric Ratio of Cathode Flow Channel on Dynamic Behavior of PEMFC
Sang Seok Han, University of Incheon; Pil Hyong Lee, University of Incheon; Jae Young Lee, University of Incheon; Chang Soo Park, University of Incheon; Sang Soon Hwang, University of Incheon

Extended Abstract

GHT25b-9

Effects of Cooling Channel Configurations on Performance of a PEMFC
Kyoungyoun Kim, Korea Institute of Energy Research; Young-Jun Sohn, Korea Institute of Energy Research; Minjin Kim, Korea Institute of Energy Research; Won-Yong Lee, Korea Institute of Energy Research

Extended Abstract

GHT25b-10

Measuring Water Vapor Flux Across Model Proton Exchange Membranes
Daniel Burnett, Surface Measurement Systems; Armando R. Garcia, Surface Measurement Systems; Ron Gray, Surface Measurement Systems

Extended Abstract

GHT25b-11

Experimental Characterization and Computational Modeling On Self Air-Breathing, Dead End Anode PEM Fuel Cell Performance
Hee Joo Poh, Institute of High Performance Computing; Arun S. Mujumdar, National University of Singapore; Chun Ta Chan, National University of Singapore

GHT25b-12

A Single Cell Testing and Evaluation of a High Temperature PBI Based PEM Fuel Cell
Etim U. Ubong, Kettering University

Extended Abstract

GHT25b-13

An Interactive, Web-Based Hydrogen and Fuel Cell Expert System for Researchers, Communities and Users
Bruno Gnoerich, Institut für Kraftfahrwesen of RWTH; Jane Patterson, Ricardo UK

Extended Abstract

GHT25b-14

A Semi-Empirical Approach to the Efficiency Evaluation of a Direct Liquid-Feed Fuel Cell
Yu-Jen Chiu, Technology and Science Institute of Northern Taiwan; Tsung-Han Li, Technology and Science Institute of Northern Taiwan; Yen-Ting Lin, Technology and Science Institute of Northern Taiwan

Extended Abstract

GHT25b-15

Measurement of Input Energy of Natural Gas with Thermal Mass Flow Controller or Meter
Yohei Tanaka, National Institute of Advanced Industrial Science and Technology; Ken Kato, National Institute of Advanced Industrial Science and Technology; Akira Negishi, National Institute of Advanced Industrial Science and Technology; Ken Nozaki, National Institute of Advanced Industrial Science and Technology; Tohru Kato, National Institute of Advanced Industrial Science and Technology

Extended Abstract

GHT25b-16

Testing and Modeling of Micro PEM Fuel Cells
Yuhao Lu, The University of Alabama; Ramana G. Reddy, The University of Alabama

Extended Abstract

GHT25b-17

Gas & Liquid Flow Control for Fuel Cell Testing
Jan D. Christensen, Brooks Instrument

Extended Abstract

GHT25b-18

Performance Evaluations of Metallic Bipolar Plates Fabricated Using Different Manufacturing Processes
Muammer Koc, Department of Mechanical Engineering, Virginia Commonwealth University; Sasawat Mahabunphachai, Department of Mechanical Engineering, Virginia Commonwealth University

Extended Abstract

GHT25b Fuel Cell Testing & Modeling Posters